4001 Fresh Concrete Caesarstone Quartz

Online ID: 831
Write a review
Ask a Question
Lots of Interest: Over 8 people looked at this in the last 24 Hours
In Stock
Description

4001 Fresh Concrete Caesarstone is a consistent off-white quartz. Caesarstone is a line of engineered stone made from 93 percent natural quartz and 7 percent polyresin. All slabs the company produces are polished and cut 1 ¼ inches thick.

It is durability that convinces many homeowners to choose quartz rather than other types of stone. Quartz surfaces are also very easy to take care of. With all these benefits, it is not hard to see why 4001 Fresh Concrete Caesarstone quartz is a popular material among homeowners. This material is suitable for kitchen countertops, bathroom vanity tops, backsplashes and many other home surfaces. It is non-porous, so it is resistant to stains and many other household hazards (except for heat). 4001 Fresh Concrete Caesarstone is one of the top stone options that you will find. Choosing to implement it into your home can be one of the best decisions you ever make for your home.

Item Details:
Original Name: 4001 Fresh Concrete Caesarstone
Material Type: Quartz
Country of origin: Israel
Colors: White
Material Application:
Exterior Elevation
Bar
Outside Barbecue
Outside Bar
Wash Station
Bathroom Floor Panels
Bathroom Wall
Butler Pantry
Hot Tub Surround
Bathroom Backsplash
Bathroom Vanity Top
Kitchen Backsplash
Kitchen Countertop
Other
FAQs
1. Do quartz countertops need to be sealed?
Quartz is a non-porous material and therefore it does not need to be sealed.
2. Is quartz heat resistant?
While quartz countertops can withstand some heat, it is always recommended to use trivets when placing hot objects on quartz countertops.
3. Can I cut on a quartz countertop?
Quartz is scratch resistant, however it is always recommended to use a cutting board when cutting on the countertops.
4. Is quartz stain resistant?
Yes, unlike natural stone, quartz is resistant to most common types of stains.
5. Where can I install quartz?
Quartz can be installed on most surfaces around the home, including kitchen countertops, backsplashes, vanity tops and more.
FAQ General
1. Do you provide free samples? How many samples can I take?
At marble.com samples are free, and we encourage our clients to take up to ten samples per visit.
2. What materials can I find at your facilities?
All Marble.com facilities carry slabs of granite, quartz, quartzite, marble, soapstone, slate, limestone, and travertine. Our Ridgefield Park yard has the largest selection, also offering slabs of gemstone, porcelain, and glass.
3. Why should I see a slab in person?
Since every slab of natural stone is completely unique, we recommend visiting one of our facilities to see slab patterns and variations in person.
4. Where does your material come from?
At marble.com we source our stone only from the most reputable quarries from around the globe, including those from Italy, Spain, Brazil, and India.
5. Why is some stone more expensive than others?
Stone slabs that are extremely rare and boast unique colors tend to be more expensive than commonly found stone.
6. Do I have to seal natural stone?
We do recommend sealing natural stone countertops periodically, the frequency of sealing the stone depends on the material.
7. What is a honed finish?
A honed stone finish refers to the smooth, matte surface of the material, which creates a visibly lighter and softer tone. While honed finish might be an ideal design choice for some homeowners, it also makes the stone more susceptible to staining and etching.
8. Can a chip on my countertop be repaired?
Most chips, smaller than a dime in diameter, can be repaired by the homeowner using a chip repair kit. We do recommend professional service care for larger chips.
9. Can I install my own countertops?
We recommend professional installation, completed by our trained technicians for all major projects, however some smaller pieces may be installed by the customers.
Contact Marble.com
Chat with a representative

Get Your Countertop Estimate Today!

Curious about how to get your project started?